800tvl and 200mw FPV Camera Transmitter Set

SKU

15585823

Quantity in stock

2 item(s) available

Our price:

£35.95 (€42.42)

Quantity (2 available)

Ask a question about this product

FPV Camera and Video Transmitter Set genuine 200mw tranmitter combined with a well proven and trusted 800tvl camera

Not pre-wired so you do have to wire it, required power supply would be 7v to 20v, plenty of wires/cables supplied for you to use, very simply red is positive voltage, black is ground/negative and yellow is video

Benefits over other systems:
40 channels including Raceband, not the old 32ch
Genuine 200mw output
Proven 800tvl camera with removable edges to chop it down to 32x32

Micro 200mw 5.8Ghz 40 Channel Raceband Video Transmitter:

7.1 grams RP-SMA Connector (pin in centre) standard antenna included, we highly recommend a 4 lobe circularly polarised antenna as an optional extra (see our listings)

IMPORTANT ! never power the transmitter without a properly matched antenna attached

Tiny TS5823S 5.8G 200mW VTx, support 40CH (5 bands, 8 channels per band), range can easily be 500m or greater with better antenna fitted. with a 14DBi receiver antenna, can reach 1500 meters clear line of sight

Features Point :

200MW genuine power
Supports 40CH
Long range capable
Compact
7.1g (antenna is not included in weight)
Wide input voltage（7-24V）
Easy installation
Stable, anti-interference
RP-SMA Jack (pin in centre not hole)

*Notice: The use and operation of this product in the UK and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices including the UK regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Tecnic cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.

800tvl high resolution board camera for FPV:

Seriously good value and far superior to how I thought it was going to be in testing (if it fails my requirements I don't sell them)

This product adopts high sensitivity sensor with a resolution of 800TVL. 5~20V wide voltage input, it can support power DC5V to DC20V. Due to its wide range power, there is no need to use voltage converter. We include a 30cm servo cable which can be used to connect to the VTx directly (please check the pin-outs on your VTx and swap the pins on the cable to match). Size 38*32mm, you can cut the edge and make it into a camera of 32*32mm, though any modifications will invalidate the warranty. Light weight of just 13g.
By default, we ship out the camera with 2.8mm wide angle lens. If you need a wider or narrower lens you can buy the other lenses separately.

Apologies for the bumpy ride. it was quite windy during the test flight
If the video below does not work then please copy and paste this URL into your browser:
https://www.youtube.com/watch?v=GuB2-k7pn3o

Details:
PAL format
1/3" High Sensitivity CMOS sensor
Auto color to black function
Up to 800TVL high resolution
Auto White Balance
Auto AGC
Low illumination: 0.05lux
Low current: 55mA
DC5V~DC20V