The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        
Home :: Multirotors :: DL265 Full Carbon Fibre Racing Quadcopter inc Motors, ESC Camera and Transmitter

DL265 Full Carbon Fibre Racing Quadcopter inc Motors, ESC Camera and Transmitter

DL265 Full Carbon Fibre Racing Quadcopter inc Motors, ESC Camera and Transmitter
22%
SKU
TC1177MR
Quantity in stock
No items available
Parcel Weight
999.00 grams
Market price:
£179.99
Our price:
£139.95 (165.14)
 
Qty Out of stock

DL265 Full Carbon Fibre Racing Quadcopter Set with angle adjustable FPV camera mount Inc FPV Camera, Motors, ESC's, 600mw Video Tranmitter, Antenna and Accessories

DL265 is the latest race frame, 265 instead of 250 to make room for 5 or 6 inch props, all carbon fiber body and arms (not a cheap glass fibre laminate), thicker rack, 2mm centre board, arm thickness is 3mm, very strong. with unique motor/arm protective device design and adjustable lens pitch angle make it very suitable for race

 

1 x Full Carbon Frame set
4 x 2200kv high quality balanced motors 3s/4s
4 x BLHeli Oneshot125 12a opto ESC's
1 x CC3D Evo flight controller
1 x 600tvl Sony Superhad II CCD Camera
1 x 600mw 32ch Micro Transmitter
16 x Gemfan 6045 Props
1 x Power Distribution board with built in 5v and 12v UBEC
Lots of accessories

Frame Features:

Adjustable lens mount: adjust lens pitch angle
Motor/Arm protective device: foot stool, nylon plus fibre
Multiple holes for antenna on upper layer plate and centre plate
2mm 3K all carbon fiber centre plate (not a cheap GF sandwich)
3mm 3K all carbon fiber arm (not a cheap GF sandwich)
Installation location for headlights and taillight
Reasonable layout, easy installation
ESC can be installed on the arm or in the body
6mm high intensity aluminum pillar

Diagonal wheelbase:265mm

Weight:130g without motor protective device, 142g with motor protective device

Supported motor:1806/2204/2206/2208

Supported props:5”/6” - I recommend 3S with the 6 inch props supplied, switch to 5 inch props if you want to run 4S

Motors are RC Inpower QAV 2206 2200kv 3/4S

Motors Specifications:

- KV: 2200
- Configuration: 12N14P
- Stator diameter: 22mm
- Stator length: 4mm
- Shaft diameter: 3mm
- Motor dimension: 27.5*28.2mm
- Weight: 27.4g
- Idle current: 0.35A
- No.of cells: 3-4S
- Max continuous power 180S:  270
- Internal resistance: 190m ohm
- Max current: 16A
- Max efficiency current: 3-6A>81%

Props: Gemfan ABS (very tough) 6045, 4 x Orange CCW, 4 x Orange CW, 4 x Green CCW and 4 x Green CW

ESC's: DALRC BL 12A ESC, supports OneShot ultra high speed control, bi-directional rotating (for 3D Quad use), brake, demagnetization compensation, closed loop and etc.

ESC Specification:

Equipped with certified components and use high-speed chip shooter to ensure high quality and excellent current endurance capacity of this ESC

Based on BLHeli programming, it is optimized for better performance with linearity and much quicker throttle response.

Designed especially for multirotors, it has good compatibility with fixed-wing aircrafts and helicopters.

Features low voltage protection, Over-Temperature protection, signal loss protection and etc.

Supports alarm function, ESC buzz if low throttle continues for a while.

Throttle calibration can be preset to be compatible with different receivers.

Parameters of speeder can be set or reset by remote controler or programming card.

Note: If you’re using CC3D, you have to use PPM or S.bus receiver if you want to use OneShot125 mode.

Working current: 12A
Instantaneous current: 20A (5 second)
Power: 2-4S (7-17V)
Size: 31*15*5mm
Weight (wire included): 7.4g
BEC linearity: NO
Programmable: YES

CC3D EVO:

http://www.openpilot.org/(official website)
http://wiki.openpilot.org/display/Doc/CopterControl+Hardware+Manual(Hardware Introduction)
http://wiki.openpilot.org/pages/viewpage.action?pageId=20250682(Usage introduction)
http://wiki.openpilot.org/display/Doc/Installing+the+Ground+Control+Station(Ground station software)
CopterControl from the OpenPilot project introduces a new generation of multi-purpose aircraft stabilization platforms.  The CC3D has been designed from the ground up to perform the following functions:
- a MultiRotor controller with auto-level, including TriCopters, QuadCopters and  HexaCopters
- a Flybarless Helicopter controller with auto-level

The CopterControl hardware has the following features:
Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and  20KB RAM
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs  accelerometer
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight  performance.
Software support for Windows, Mac and Linux
Direct high speed USB support with no drivers required, a truly plug and play  device.
Spektrum satellite receiver support
Futaba S-BUS hardware support
Innovative Flexi-port technology for superior port flexibility
4Mbits on-board EEPROM for configuration storage

We also include a CC3D power distribution board which gives a regulated 12v and 5v outputs as well as acting as power distribution for your ESC's and switch for the LED unit

The supplied FPV Camera is a 600tvl Sony Superhad II CC1333/PZ0420 Board version with IR block filter for superior colours, this is the favourite camera amongs all experienced FPV pilots especially quad racing due to reliability, resolution and most importantly low lag (virtually no image delay compared to other cameras)

The video transmitter is the latest 600mw tiny 32ch version also supplied with an Aomway 4 lobe circularly polarised antenna

Accessories include XT60 connector, tie wraps, heat shrink, sticky foam,Silicone wire, 10cm RP-SMA antenna extension

You will require your own radio control transmitter and receiver, HD camera such as a Mobius/GoPro, a set of FPV goggles or monitor with receiver, 1500mah to 2200mah 3S/4S battery plus a Lipo balance charger, oh and a lot of building skill or the willingness to learn, there are many forums out there loaded with the knowledge you will require but be warned this is NOT FOR BEGINNERS !

: *
: *
: *
 
Foxeer 5.8G Four Lobe FPV Antenna Ultra Tough RP-SMA LHCP
Foxeer 5.8G Four Lobe FPV Antenna Ultra Tough RP-SMA LHCP
£9.95
Switcher 25/200/600mw Raceband 40ch Mini 5.8gHz Video Transmitter SMA
Switcher 25/200/600mw Raceband 40ch Mini 5.8gHz Video Transmitter SMA
£34.95
Mobius HD Camera Wide Angle C type Lens V3
Mobius HD Camera Wide Angle C type Lens V3
£49.00
Plastic Case for PZ0420 CC1333 600tvl CCD Camera
Plastic Case for PZ0420 CC1333 600tvl CCD Camera
£3.50
FPV Cable for GoPro Hero 3 Video out and Power in
FPV Cable for GoPro Hero 3 Video out and Power in
£2.45
Aomway 5.8G 11dbi 7 Turn Helical RHCP Antenna RP-SMA
Aomway 5.8G 11dbi 7 Turn Helical RHCP Antenna RP-SMA
£19.95
GPS Unit for Suppo Free Bird OSD 10Hz inc Cable
GPS Unit for Suppo Free Bird OSD 10Hz inc Cable
£16.95
12mm 3 Megapixel MTV Lens for FPV and CCTV Cameras
12mm 3 Megapixel MTV Lens for FPV and CCTV Cameras
£10.95
BNC Male to RCA/Phono Female Adaptor for FPV Cameras
BNC Male to RCA/Phono Female Adaptor for FPV Cameras
£2.45

Customer Reviews

There have been no reviews for this product.